No heat? Call (587) 741-8880Smell gas? Leave the house, then call 911 or ATCO 1-800-511-3447

Home / No-heat checklist

Furnace not working? Try this checklist first

Five quick checks fix a surprising number of no-heat calls. Safety comes first: if you smell gas or a CO alarm is sounding, stop here and leave the house.

Stop and leave the house if you smell gas (rotten eggs) or a carbon monoxide alarm is sounding. Do not use switches, lighters or your phone inside. From outside, call 911 or ATCO Gas at 1-800-511-3447.

1. Thermostat

Set to Heat, a few degrees above room temperature. If the screen is blank, replace the batteries.

2. Power to the furnace

Check the furnace switch (it looks like a light switch near the unit) and the breaker.

3. Furnace filter

A badly clogged filter can make a furnace shut itself off. Replace or clean it.

4. Outside intake and exhaust pipes

Make sure the white pipes on the outside wall are not blocked by snow or ice.

5. Gas supply

If other gas appliances (stove, water heater) also do not work, it may be a gas supply problem. Call ATCO's emergency line.

Sources

  1. ATCO Gas: outages and emergencies
  2. ATCO Gas: report a gas emergency (leave first, then call)
  3. Alberta Municipal Affairs: carbon monoxide alarm safety tip

Figures are guides, not quotes. Prices and rules change; confirm with your contractor and the City of Edmonton. Last reviewed November 2026.

Need heat back on in Edmonton?

Call now to reach a local technician, or send a quick request.

Call nowQuote